Blockheizkraftwerk2

Operating cogeneration units with high availability

Small but safe power packs for domestic use

A combined heat and power unit (CHP) is a modular system for the extraction of electrical energy and heat. This is operated at the point of heat consumption. It is based on the principle of combined heat and power. Combustion engines, e.g. diesel, vegetable oil or gas engines, gas turbines and Stirling engines can all be used as drive for the power generator. As with generators, the electrotechnical monitoring is based on the insulation level or on the existing fault current, depending on the supply system (IT, TN). The frequency and the voltage also need to be within a specific range in order to be able to be fed into the general power grid.

REQUEST ADVICE

Downloads

NameCategorySizeLanguageTimestampD-/B-Number
Product Overview ISOMETER®/ISOSCAN® Product Overviews 5.3 MB EN2024/02/1616.02.2024
Product Overview - Residual Current Monitoring Product Overviews 6.2 MB EN2023/11/0909.11.2023
Renewable Energy Market Segment Brochures 4.3 MB EN2017/02/2727.02.2017
Safe Connection to the Grid VMD460-NA Flyer 222.0 KB EN2019/05/1313.05.2019D00001

Products

Insulation monitoring

ISOMETER® IR425-D4
ISOMETER® IR425-D4

Insulation monitoring device for unearthed AC/DC control circuits

Residual current monitoring

LINETRAXX® RCMA420
LINETRAXX® RCMA420

AC/DC sensitive residual current monitor for TN and TT systems (AC, DC, pulsed DC currents)

Measuring and monitoring relays

LINETRAXX® VMD460-NA
LINETRAXX® VMD460-NA

Network and system protection (NS protection) for monitoring the power infeed of power generation systems

Insulation monitoring

ISOMETER® IR425-D4
ISOMETER® IR425-D4

Insulation monitoring device for unearthed AC/DC control circuits

Details

Residual current monitoring

LINETRAXX® RCMA420
LINETRAXX® RCMA420

AC/DC sensitive residual current monitor for TN and TT systems (AC, DC, pulsed DC currents)

Details

Measuring and monitoring relays

LINETRAXX® VMD460-NA
LINETRAXX® VMD460-NA

Network and system protection (NS protection) for monitoring the power infeed of power generation systems

Details

Standards

DIN EN 60255-127

Measuring relays and protection equipment - Part 127: Functional requirements for over/under voltage protection

CEI 0-21

Regola tecnica di riferimento per la connessione di Utenti attivi e passivi alle reti AT ed MT delle imprese distributrici di energia elettrica (Reference technical rules for the connection of active and passive consumers to the HV and MV electrical networks of distribution Company)

VDE-AR-N 4105

Anwendungsregel:2011-08 Erzeugungsanlagen am Niederspannungsnetz Technische Mindestanforderungen für Anschluss und Parallelbetrieb von Erzeugungsanlagen am Niederspannungsnetz

C10/11

Specifieke technische aansluitingsvoorschriften voor gedecentraliseerde productie-installaties die in parallel werken met het distributienet

DIN VDE 0126-1-1/A1

Selbsttätige Schaltstelle zwischen einer netzparallelen Eigenerzeugungsanlage und dem öffentlichen Niederspannungsnetz (Norm wurde zurückgezogen und durch DIN VDE V 0126-1-1 ersetzt)

G59/2

Recommendations for the Connection of Generating Plant to the Distribution Systems of Licensed Distribution Network Operators

G59/3

Recommendations for the Connection of Generating Plant to the Distribution Systems of Licensed Distribution Network Operators

G83/2

Recommendations for the Connection of Type Tested Small-scale Embedded Generators (up to 16A per phase) in parallel with Low Voltage Distribution Systems

G83/3

Recommendations for the Connection of Type Tested Small-scale Embedded Generators (up to 16A per phase) in parallel with Low Voltage Distribution Systems

BDEW
qhy4raey

Do you have any questions?

Please contact us! We are here to help.

TO CONTACT FORM