Offshore

Drilling rigs and floating production plants

Oil rigs and floating production systems

Far from land but nonetheless safe

An offshore oil rig has working production systems which normally produce around the clock and should not be shut down due to minor electrical faults. The use of ungrounded systems (floating systems) with appropriate monitoring devices from Bender ISOMETER® can guarantee this. Personal protection must also be ensured in the accommodation and supply units. This involves, for example, monitoring with RCMS residual current systems which allow the fastest possible warning and shutdown. All system data can be transferred to a central control point.

REQUEST ADVICE

Downloads

CategoryNameSizeLanguageTimestampD-/B-Number
Datasheets EDS309x 717.2 KB EN2019/05/13 10:31:3513.05.2019 10:31:35D00012
Flyer Earth fault protection of umbilicals 450.1 KB EN2019/08/28 12:31:2728.08.2019 12:31:27
Technical article Insulation Fault Location - Planning and Setup 112.4 KB EN2019/05/13 10:29:2213.05.2019 10:29:22
Technical article Electrical Safety in Control and Auxiliary Circuits 632.6 KB EN2019/05/13 10:29:2213.05.2019 10:29:22

Products

Insulation monitoring

ISOMETER® isoHR685W-…-I-B
ISOMETER® isoHR685W

Insulation monitoring device for measuring high-resistance insulation resistances up to 10 GΩ and to monitor long parallel cable

ISOMETER® iso685…
ISOMETER® iso685…

Insulation monitoring device for inverter applications and large industrial plants

ISOMETER® IRDH275
ISOMETER® IRDH275

- This device series is in the discontinuation phase. -
Available until 31.12.2023.

ISOMETER® IRDH375
ISOMETER® IRDH375

- This device series is in the discontinuation phase. -
Deliverable according to availability until 31.12.2023.

System components

AGH150W-4
AGH150…

Extension of the nominal voltage range of ISOMETER® iso685 series to AC 0...1150 V, DC 0...1760 V

AGH204S-4
AGH204S-4

Extension of the nominal voltage range of ISOMETER® iso685 series to AC, 3(N)AC 0...1650/0...1300 V

AGH520S
AGH520S

Extension of the nominal voltage range of ISOMETER® to AC 0...7200 V

Residual current monitoring

LINETRAXX® SmartDetect RCMS410

Four-channel DC, AC and pulse current sensitive residual current monitor for earthed AC, AC/DC and DC systems

LINETRAXX® RCMS460-D
LINETRAXX® RCMS460-D

Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor

LINETRAXX® RCMS460-L
LINETRAXX® RCMS460-L

Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor

LINETRAXX® RCMS490-D
LINETRAXX® RCMS490-D

Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor with one alarm contact per channel

LINETRAXX® RCMS490-L
LINETRAXX® RCMS490-L

Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor with one alarm contact per channel

Insulation fault location

ISOSCAN® EDS30…
ISOSCAN® EDS30…

Portable insulation fault location systems for unearthed and earthed systems (IT and TN systems)

Neutral Grounding Resistance (NGR) Monitoring

LINETRAXX® NGRM700

The advanced Neutral Grounding Resistor Monitor for sophisticated applications

Insulation monitoring

ISOMETER® isoHR685W-…-I-B
ISOMETER® isoHR685W

Insulation monitoring device for measuring high-resistance insulation resistances up to 10 GΩ and to monitor long parallel cable

Details
ISOMETER® iso685…
ISOMETER® iso685…

Insulation monitoring device for inverter applications and large industrial plants

Details
ISOMETER® IRDH275
ISOMETER® IRDH275

- This device series is in the discontinuation phase. -
Available until 31.12.2023.

Details
ISOMETER® IRDH375
ISOMETER® IRDH375

- This device series is in the discontinuation phase. -
Deliverable according to availability until 31.12.2023.

Details

System components

AGH150W-4
AGH150…

Extension of the nominal voltage range of ISOMETER® iso685 series to AC 0...1150 V, DC 0...1760 V

Details
AGH204S-4
AGH204S-4

Extension of the nominal voltage range of ISOMETER® iso685 series to AC, 3(N)AC 0...1650/0...1300 V

Details
AGH520S
AGH520S

Extension of the nominal voltage range of ISOMETER® to AC 0...7200 V

Details

Residual current monitoring

LINETRAXX® SmartDetect RCMS410

Four-channel DC, AC and pulse current sensitive residual current monitor for earthed AC, AC/DC and DC systems

Details
LINETRAXX® RCMS460-D
LINETRAXX® RCMS460-D

Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor

Details
LINETRAXX® RCMS460-L
LINETRAXX® RCMS460-L

Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor

Details
LINETRAXX® RCMS490-D
LINETRAXX® RCMS490-D

Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor with one alarm contact per channel

Details
LINETRAXX® RCMS490-L
LINETRAXX® RCMS490-L

Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor with one alarm contact per channel

Details

Insulation fault location

ISOSCAN® EDS30…
ISOSCAN® EDS30…

Portable insulation fault location systems for unearthed and earthed systems (IT and TN systems)

Details

Neutral Grounding Resistance (NGR) Monitoring

LINETRAXX® NGRM700

The advanced Neutral Grounding Resistor Monitor for sophisticated applications

Details

Standards

EN 61557-8

Electrical safety in low voltage distribution systems up to 1 000 v a.c. and 1 500 v d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems.

EN 61557-9

Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems

EN 61557-15

Electrical safety in low voltage distribution systems up to 1000 V ac and 1500 V dc - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems

IEC 61892-1

Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions

IEC 61892-2

Mobile and fixed offshore units - Electrical installations - Part 2: System design

IEC 61892-7

Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas

Drilling ships

Secure extraction, storage and shipping

A Floating Production Storage and Offloading Unit (FPSO) is a ship used for extraction, storage and offloading of petroleum and natural gas. In offshore operations, FPSOs are used because they remove the need to construct a complicated, expensive pipeline infrastructure to the extraction site. Bender kits out these ships with the appropriate ISOMETER® technology to ensure maximum safety.

REQUEST ADVICE

Downloads

CategoryNameSizeLanguageTimestampD-/B-Number
Flyer Earth fault protection of umbilicals 450.1 KB EN2019/08/28 12:31:2728.08.2019 12:31:27
Technical article Insulation Fault Location - Planning and Setup 112.4 KB EN2019/05/13 10:29:2213.05.2019 10:29:22
Technical article Electrical Safety in Control and Auxiliary Circuits 632.6 KB EN2019/05/13 10:29:2213.05.2019 10:29:22

Products

Insulation monitoring

ISOMETER® IRDH575
ISOMETER® IRDH575

- This device series is in the discontinuation phase. -
Deliverable according to availability until 31.12.2023.

ISOMETER® iso685…
ISOMETER® iso685…

Insulation monitoring device for inverter applications and large industrial plants

ISOMETER® isoHR685W-…-I-B
ISOMETER® isoHR685W

Insulation monitoring device for measuring high-resistance insulation resistances up to 10 GΩ and to monitor long parallel cable

System components

AGH150W-4
AGH150…

Extension of the nominal voltage range of ISOMETER® iso685 series to AC 0...1150 V, DC 0...1760 V

AGH204S-4
AGH204S-4

Extension of the nominal voltage range of ISOMETER® iso685 series to AC, 3(N)AC 0...1650/0...1300 V

AGH520S
AGH520S

Extension of the nominal voltage range of ISOMETER® to AC 0...7200 V

Neutral Grounding Resistance (NGR) Monitoring

LINETRAXX® NGRM700

The advanced Neutral Grounding Resistor Monitor for sophisticated applications

Insulation monitoring

ISOMETER® IRDH575
ISOMETER® IRDH575

- This device series is in the discontinuation phase. -
Deliverable according to availability until 31.12.2023.

Details
ISOMETER® iso685…
ISOMETER® iso685…

Insulation monitoring device for inverter applications and large industrial plants

Details
ISOMETER® isoHR685W-…-I-B
ISOMETER® isoHR685W

Insulation monitoring device for measuring high-resistance insulation resistances up to 10 GΩ and to monitor long parallel cable

Details

System components

AGH150W-4
AGH150…

Extension of the nominal voltage range of ISOMETER® iso685 series to AC 0...1150 V, DC 0...1760 V

Details
AGH204S-4
AGH204S-4

Extension of the nominal voltage range of ISOMETER® iso685 series to AC, 3(N)AC 0...1650/0...1300 V

Details
AGH520S
AGH520S

Extension of the nominal voltage range of ISOMETER® to AC 0...7200 V

Details

Neutral Grounding Resistance (NGR) Monitoring

LINETRAXX® NGRM700

The advanced Neutral Grounding Resistor Monitor for sophisticated applications

Details

Standards

EN 61557-8

Electrical safety in low voltage distribution systems up to 1 000 v a.c. and 1 500 v d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems.

EN 61557-9

Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems

EN 61557-15

Electrical safety in low voltage distribution systems up to 1000 V ac and 1500 V dc - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems

IEC 61892-1

Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions

IEC 61892-2

Mobile and fixed offshore units - Electrical installations - Part 2: System design

IEC 61892-5

Mobile and fixed offshore units - Electrical installations - Part 5: Mobile units

IEC 61892-7

Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas

qhy4raey

Do you have any questions?

Please contact us! We are here to help.

TO CONTACT FORM