Periodic verification without shutting down

Periodic verification without shutting down

Recurrent tests and troubleshooting

Measuring instead of disconnecting - Compliant expert solutions

All electrical equipment must be tested on a regular basis. This is a requirement of IEC 60364-6 and also in the interests of the system operator. After all, tests prevent high repair costs and consequential damage as a result of poor maintenance. It is also the only way to guarantee optimum configuration of devices and systems. Bender offers solutions for measuring without disconnection.

REQUEST ADVICE

Retrofitting

Does your hospital comply with current legislation?

Even with state-of-the-art electrical engineering equipment, time can take its toll. Whether it is a decline in operational reliability, changes in statutory regulations or increasing energy costs: adapting to the latest state of the art is crucial. Typically, products to monitor energy quality and for troubleshooting are retrofitted. Get us to test your electrical systems and we will give you suggestions as to how to proceed.

REQUEST ADVICE

Downloads

NameCategorySizeLanguageTimestampD-/B-Number
Bender Remote Assist Product Brochures 811.9 KB EN2019/05/1313.05.2019
EDS309x Application note 1.4 MB EN2019/05/1313.05.2019D00012
Insulation Fault Location - Planning and Setup Technical article 112.4 KB EN2019/05/1313.05.2019

Products

Test engineering

UNIMET® 810ST
UNIMET® 810ST

Safety tester for service purposes, the user-friendly one among safety testers

Insulation fault location

ISOSCAN® EDS30…
ISOSCAN® EDS30…

Portable insulation fault location systems for unearthed and earthed systems (IT and TN systems)

ISOSCAN® EDS151
ISOSCAN® EDS151

Insulation fault locator with 6 integrated measuring current transformers for localisation of insulation faults in control circuits

Power Quality

LINETRAXX® PEM353

Universal measuring device with numerous measured quantities, energy and power measurement with storage, Power Quality Monitoring, limit value monitoring with alarm forwarding

Switching equipment and IPS

ATICS®-…-DIO
ATICS®-…-DIO

Automatic switching device for safety power supplies

ATICS®-…-ISO
ATICS®-…-ISO

Automatic transfer switching devices with monitoring functions for unearthed safety power supplies

Residual current monitoring

LINETRAXX® RCMS460-D
LINETRAXX® RCMS460-D

Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor

LINETRAXX® SmartDetect RCMS410

Four-channel DC, AC and pulse current sensitive residual current monitor for earthed AC, AC/DC and DC systems

Test engineering

UNIMET® 810ST
UNIMET® 810ST

Safety tester for service purposes, the user-friendly one among safety testers

Details

Insulation fault location

ISOSCAN® EDS30…
ISOSCAN® EDS30…

Portable insulation fault location systems for unearthed and earthed systems (IT and TN systems)

Details
ISOSCAN® EDS151
ISOSCAN® EDS151

Insulation fault locator with 6 integrated measuring current transformers for localisation of insulation faults in control circuits

Details

Power Quality

LINETRAXX® PEM353

Universal measuring device with numerous measured quantities, energy and power measurement with storage, Power Quality Monitoring, limit value monitoring with alarm forwarding

Details

Switching equipment and IPS

ATICS®-…-DIO
ATICS®-…-DIO

Automatic switching device for safety power supplies

Details
ATICS®-…-ISO
ATICS®-…-ISO

Automatic transfer switching devices with monitoring functions for unearthed safety power supplies

Details

Residual current monitoring

LINETRAXX® RCMS460-D
LINETRAXX® RCMS460-D

Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor

Details
LINETRAXX® SmartDetect RCMS410

Four-channel DC, AC and pulse current sensitive residual current monitor for earthed AC, AC/DC and DC systems

Details

Standards

DIN VDE 0100-710

Errichten von Niederspannungsanlagen - Teil 7-710: Anforderungen für Betriebsstätten, Räume und Anlagen besonderer Art – Medizinisch genutzte Bereiche

HD 60364-7-710

Low-voltage electrical installations - Part 7-710: Requirements for special installations or locations - Medical locations (IEC 60364-7-710:2002, modified); German implementation HD 60364-7-710:2012

IEC 60364-7-710

Electrical installations of buildings - Part 7-710: Requirements for special installations or locations - Medical locations

IEC 60947-6-1

Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment

qhy4raey

Do you have any questions?

Please contact us! We are here to help.

TO CONTACT FORM