- Products
- Residual current monitoring

RC48C
The RC48C ground-fault ground-c ontinuity monitor is used to monitor the residual current in high-resistance grounded instal- lations. The maximum ground faul t current in these installations is limited by a neutral grounding resistor to 5 A, 15 A or 25 A. It is particularly suitable for trailing cable protection. Trailing cables are very susceptible to environmental damage and therefore they need special attention. This is where BENDER comes in.
The RC48C ground-fault ground -continuity monitor combines two functions in one device:
- Monitoring of the residual current and
- Monitoring the grounding conductor for low resistance, high resistance and shorted.
If a limiting value is exceeded, a relay with two voltage free chan- geover contacts will be activated. Alarm messages of the RC48C ground-fault ground-c ontinuity monitor can also be displayed on a remote RI2000GC alarm indicator and operator panel.
- Features
- Applications
- Accessories
- Ordering information
- Downloads
- Ground-fault monitor for high-resistance grounded installations with a limited fault current of 5 - 25 A
- Measures the residual current by means of a Bender residual current transformer
- Alarm easily recognizable by LED lights
- Alarm relay with two voltage free changeover contacts
- Alarm contact delayable by a selectable time
- Recognizes series resistance faults and cross resistance faults
- The alarm relay can be used for the tripping of a load switch
- Depending on the type of load switch the operating mode of the alarm relay can be set to N/O operation or N/C operation
- High-resistance grounded installations with a limited fault current of 5 - 25 A
- Mining applications
Mandatory accessories for RC48C
Type designation | Art.-No. |
---|---|
Termination device, P = 5 W | B94013008 |
Termination device, P = 50 W | B94013009 |
Termination device, P = 50 W | B94013006 |
Termination device with integrated resistor, P = 50 W | B94013007 |
Remote alarm indicator and operator panel | B94071000 |
Residual current transformer, 70 mm | B911777 |
Residual current transformer, 105 mm | B911778 |
Variants of RC48C
Basic device | Supply voltage/ frequency range US | Power consumption | Art. No. |
---|---|---|---|
Ground-fault ground-continuity monitor RC48C-935 | AC/DC 60 ... 264 V 50 ... 60 Hz | approx. 5 VA at AC 60 V approx. 8.5 VA at AC 264 V | B94013002 |
Downloads for RC48C
Category | Product | Language | Size | Download |
---|